Product overview
Fig. 1: Schematic illustration DID-E2-VC
1
Primary air spigot
2
Terminal box for electrical connection of
volume flow controller (only with version VC)
3
Pressure measurement point (only with ver-
sion VC)
4
Rating plate
5
Water connections, valve with actuator
(optional)
6
Water connections, lockshield (optional)
7
Casing
8
Hanging brackets (4)
9
Extension spigot for supply air (optional)
10
Ventilation grille for supply air (optional)
11
Installation subframe for secondary air grille
(optional)
12
Safety cable for securing the grille
13
Secondary air grille (optional)
14
Heat exchanger
15
Pipe connection for direct valve connection
(optional)
Installation manual
GB/en
Active chilled beams
Type DID-E2
TROX GmbH
Heinrich-Trox-Platz
47504 Neukirchen-Vluyn, Ger-
many
Phone: +49 (0) 2845 2020
Fax: +49 (0) 2845 202265
E-mail: [email protected]
Internet: http://www.trox-
technik.com
A00000075523, 07/2019,
©
2019 TROX GmbH
Active chilled beams Type DID-E2
1
