3
EN
User instructions – Adsorption dehumidifier TTR 160/250
•
Do not apply any liquids to the interior of the device. If this does
happen nevertheless, pull out the power cord and have the device
checked and/or repaired by the Trotec customer service.
•
The device may only be opened, cleaned on the inside and repaired
by authorised and appropriately trained personnel.
Risk of injury!
•
Do not insert any objects into the intake and exhaust opening of the
device.
•
Do not remove any personnel protection devices against accidental
contact.
•
Do not reach into the openings of the device.
•
Do not leave children or animals unattended near the operating
device!
•
Wear a hairnet to prevent long hair from getting into the device.
•
Take off any jewellery before operating the device.
•
Always wear safety goggles to protect your eyes.
•
After decommissioning the device, let it cool down for 5 minutes be-
fore touching it to avoid burns. Wear protective gloves.
5. Proper use
The dehumidifier may exclusively be used to dehumidify atmospheric air.
Any other use is considered as improper use. Any liability for damage
resulting from this is excluded.
Dehumidifiers may not be installed in liquids nor take in any liquids
(e.g. from tanks, tubs or flooded areas, etc.).
Proper use also includes:
•
Adherence of all notes contained in the operating manual and
•
Fulfilling inspection and maintenance requirements.
Any use other than the above-mentioned uses shall be inadmissible!
6. General information
Dehumidifiers according to the adsorption principle are used for dry-
ing applications in process engineering, air conditioning, on construc-
tion sites and for dehumidifying manufacturing and storage areas where
products and installations require particularly low air humidity.
Adsorption technology enables lower dew points and, particularly at in-
take temperatures < 0 °C or intake dew points < 5 °C, safe dehumidifica-
tion that cannot be achieved with condensation dehumidifiers for physi-
cal reasons. Additionally, adsorption dehumidifiers are considerably more
economic at these operating temperatures.
4. General safety instructions
Please observe the following safety instructions!
Any non-compliance with these instructions may
have serious consequences for the health of per-
sons and could result in property damage and
damage to the environment.
Risk of explosion!
•
Do not operate the device in potentially flammable or explosive envi-
ronments. Do not install it in such environments, either.
Only devices approved according to directive 94/9/EC (ATEX 95)
may be operated in explosive environments. It is the obligation
of the operator to check the operational capability of the dehu-
midifier according to directive 1999/92/EC (ATEX 137)!
•
Do not place the device on flammable surfaces.
•
Remove any inflammable materials and chemicals from the immedi-
ate operating environment.
Functional impairment of and damage to the device!
•
Install the device in a stable position on a firm surface.
•
Protect the device from adverse weather effects.
•
Keep the intake and exhaust openings free.
•
Do not cover the device during operation.
•
Do not use any chemicals when cleaning the device.
•
Never place items on the device or step on it.
Risk of injury and damage to property due to defective
devices!
•
Before each use of the device, check its accessories and connec-
tion parts for possible damage. Do not use any defective devices or
device parts.
•
Do not use the device if you discover any damage to its plug and
cables. Defective power cables represent a serious health threat.
Danger to life through electrical shock!
•
Only connect the device to power sources that are in good technical
order. Do not use damaged wall outlets!
•
Pull the connection cable out of the wall outlet by pulling it at its plug.
•
Do not touch electrical connection cables when your hands are wet!
•
Protect electrical connection cables against damage caused by, for
example, animals.
•
Do not carry out any changes or repairs on the device!
•
Do not expose the device to any liquids.
