7
EN
Operating manual – infrared heating panel TIH 300 S / TIH 400 S / TIH 500 S / TIH 700 S / TIH 900 S / TIH 1100 S
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Check whether the power cable is intact. If the power
cable is damaged, it must be replaced by the
manufacturer, his customer service or similarly qualified
personnel.
•
Make sure that extension cables are completely unrolled.
•
Make sure that there are no curtains or similar in the
immediate vicinity.
Operation
Info
Avoid open doors and windows.
Switching the device on
Once you have completely installed or positioned the device as
described in the Start-up chapter, you can switch it on.
1. Plug the mains plug into a sufficiently fused mains socket.
Make sure that the power cable is guided along the back of
the device. Never guide the power cable along the front of
the device!
ð
The operating control lamp (2) is illuminated.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
1. Hold onto the mains plug while pulling the power cable out
of the mains socket.
ð
The operating control lamp (2) goes off.
2. Allow the device to cool down completely.
3. Clean the device according to the Maintenance chapter.
4. Store the device according to the Storage chapter.
Available accessories
Accessories
Article number
Set of 2 feet
1.410.003.001
Assembly support fastening clamps
1.410.003.004
Socket thermostat BN30
6.100.007.009
