Troubleshooting
9
Troubleshooting
This chapter should enable the maintenance personnel to identify and resolve operational faults based on error
messages and symptoms.
Warning
Risk of fire from incorrect parameter settings
.
Laser operation with incorrect parameter settings such as power settings, speed or frequency can result in
flame formation.
–
Laser operation permitted only under supervision.
Caution
System failures that cannot be remedied can cause damage to the machine.
–
Disconnect the machine from the mains and contact your local Technical Support.
9.1
Error, cause and remedy
Problem
Possible cause
Remedy
Too low engraving depth.
•
Imprecise focusing.
•
Dirty optics.
•
Check focus.
•
Clean optics.
Blurred edges.
•
Imprecise focusing.
•
Check focus.
Missing cut lines.
•
Zero passes in material database.
•
Line thickness in CorelDraw too
big.
•
Color was skipped in the
soware.
•
Increase the amount of passes in
the material database.
•
Reduce line thickness to the
smallest possible value.
•
Set color to cutting in the
database.
Waviness of the lines.
•
Lens is loose.
•
Check lens and lens holder.
No visible marking result.
•
Too low laser power.
•
Too high speed.
•
Not focused.
•
Wrong focus tool.
•
Increase power setting.
•
Reduce speed.
•
Check focus.
•
Change focus tool.
•
When using autofocus, check the
settings within the soware (lens,
material thickness, table).
Fine details on stamps are
engraved too thinly.
•
Too steep shoulders.
•
Choose other shoulder or edit
(flat/medium/steep): Options/
Process Options/Stamp.
75
Summary of Contents for Speedy 400
Page 1: ...Speedy 400 Operating manual 8070 OM 8070_1 12_EN 07 2021 ENGLISH Translation ...
Page 80: ...Appendix 13 Appendix 80 ...
Page 87: ......
Page 88: ......