Trotec Speedy 360 fiber Operating Manual Download Page 61

Page: 61 / 96

Operation

7.4.1.1 Description

Image

Button

Description

Status indicator

LED On: The machine is processing or receiving data.

Standby-button

LED On: Standby-mode

•

Press this button to switch to the Standby-mode.

•

Press the Standby-button while the working table is moving

up or down (e.g. by focus automatically).

The machine enters Standby-mode only after finishing the

movement.

Home-button

LED On: Temporary change of home position.

•

Press the Home-button for 3 seconds to temporarily define

the position of the laser head as home position (Marker in

JobControl®).

To deactivate the temporary home position press the shortcut

Shift- Home-button.

Laser head control button X/

•

Press one of these buttons to manually move the laser

head to the right, left, front or back (travel distance in X/Y-

direction).

•

Press two of the for Laser head control buttons X/Y

simultaneously in diagonal direction to move the laser in

diagonal direction (X+/Y+, X+/Y-, X-/Y-, X-/Y+).

•

Press the Shift-button together with one any desired Laser

head control button X/Y to move the laser head quickly to

the corresponding end position.

ENGLISH (Translation)

Summary of Contents for Speedy 360 fiber

































































































Search results

Summary of Contents for Speedy 360 fiber

Reviews:

Related manuals for Speedy 360 fiber

Brands by name

Popular brands

Trotec Speedy 360 fiber, Operating Manual

Search results

Summary of Contents for Speedy 360 fiber

Reviews:

Related manuals for Speedy 360 fiber

Brands by name

Popular brands