Trotec PTNS 10-230V Operating Manual Download Page 2

1

EN

Operating manual – tacker PTNS 10-230V

Table of contents

Notes regarding the operating manual................................. 1

Safety ..................................................................................... 2

Information about the device................................................ 5

Transport and storage........................................................... 6

Start-up.................................................................................. 7

Operation ............................................................................... 8

Errors and faults.................................................................... 9

Maintenance ........................................................................ 10

Disposal ............................................................................... 10

Notes regarding the operating manual

Symbols

Warning of electrical voltage

This symbol indicates dangers to the life and health of
persons due to electrical voltage.

Warning of sharp object

This symbol indicates dangers to the life and health of
persons due to pointed objects.

Warning

This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.

Caution

This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.

Notice

This signal word indicates important information (e.g.
material damage), but does not indicate hazards.

Info

Information marked with this symbol helps you to carry
out your tasks quickly and safely.

Follow the manual

Information marked with this symbol indicates that the
operating manual must be observed.

Wear ear protection

Information marked with this symbol indicates that you
should wear hearing protection.

Wear safety glasses

Information marked with this symbol indicates that you
should wear eye protection.

Wear protective gloves

Information marked with this symbol indicates that you
should wear protective gloves.

You can download the current version of the operating manual
and the EU declaration of conformity via the following link:

PNTS 10-230V

http://hub.trotec.com/?id=41136

Summary of Contents for PTNS 10-230V













Reviews: