4
EN
cordless drill driver PSCS 11-12V
•
Keep handles and grasping surfaces dry, clean and
free from oil and grease.
Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
General Power Tool Safety Warnings – Battery tool
use and care
•
Recharge only with charger specified by the
manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
•
Use power tools only with specifically designed battery
packs.
Use of any other battery packs may create a risk of
injury and fire.
•
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another.
Shorting the
battery terminals together may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the
battery may cause irritation or burns.
•
Do not use a battery pack or tool that is damaged or
modified.
Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or temperature
above 130 °C may cause explosion.
•
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outsides the specified range may damage
the battery and increase the risk of fire.
General Power Tool Safety Warnings – Charger use
and care
•
This charger can be used by children aged
from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
•
Never insert non-rechargeable batteries into the
charger.
A charger that is suitable for one type of battery
pack may create a risk of fire and explosion, when used
with another battery pack or non-rechargeable batteries.
•
Only charge the Li-Ion battery "PSCS 11-12V DC" (capacity
of 2.0 Ah = 1 battery cell) with the charger
"PSCS 11-12V AC". The battery voltage must match the
battery charging voltage of the charger.
General Power Tool Safety Warnings – Service
•
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
•
Never service damaged battery pack.
Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
Device-specific safety warnings for cordless drill
drivers
•
Secure the workpiece.
The grip of tensioning devices or a
vice is more secure than holding the workpiece only by
hand.
•
Hold the power tool firmly.
When tightening or loosening
screws, high reaction torques can occur temporarily.
•
Immediately switch off the power tool if the insertion
tool blocks.
Beware of high reaction torques causing a
kickback.
•
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fasteners may contact hidden wiring.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock.
•
For any work on the device, as well as during transport
or storage, set the switch for the rotational direction to
centre position (locked).
This prevents unintentional
starting of the power tool.
•
Regularly check the tool holder for wear or damage.
•
Wait until the power tool has come to a standstill,
before putting it down.
