EN
39
850W pendulum action jigsaw PJSS 11-230V
1. Turn the setting wheel (
1
) to the desired
stroke rate level.
1
Adjusting the pendulum action
You can adjust the pendulum movement of the saw
blade. Levels 1 to 3 allows for a faster work
progress and level 0 (pendulum movement off)
enables fine and clean cutting edges.
The ideal pendulum level for the respective
application can be determined by way of field-
testing. Please observe the following instructions:
•
If you want to obtain a fine and clean cutting
edge, preferably select a low pendulum level
or switch off the pendulum action completely.
•
Switch off the pendulum action when
processing thin materials.
•
Work at a low pendulum level when
processing hard materials.
•
For soft materials or when sawing wood with
the grain you can work with the maximum
pendulum level.
1. Set the pendulum action selector switch (
5
)
to the desired level. The higher the level, the
larger the pendulum stroke. The pendulum
action can also be adjusted during operation.
I
II
III
0
5
Connecting the power cable
1. Insert the mains plug into a properly secured
mains socket.
Operation
Tips and notes on handling the jigsaw
General information:
•
Keep the venting slots clear to prevent the
motor from overheating.
•
Check the tool in the tool holder for proper fit
before every application. The tool must be
firmly locked in place in the designated
holding fixtures in the tool holder.
•
Before every application, make sure that you
have selected the correct tool for the
intended use.
