Trotec PHDS 11-20V Original Instructions Manual Download Page 2

2

EN

cordless hammer drill PHDS 11-20V

Table of contents

Notes regarding the instructions .......................................... 2

Safety ..................................................................................... 2

Information about the device................................................ 7

Transport and storage........................................................... 9

Start-up.................................................................................. 9

Operation ............................................................................. 13

Available accessories.......................................................... 15

Errors and faults.................................................................. 15

Maintenance ........................................................................ 16

Disposal ............................................................................... 16

Declaration of conformity ................................................... 17

Notes regarding the instructions

Symbols

Warning of electrical voltage

This symbol indicates dangers to the life and health of
persons due to electrical voltage.

Warning of explosive substances

This symbol indicates dangers to the life and health of
persons due to potentially explosive substances.

Warning of hot surface

This symbol indicates dangers to the life and health of
persons due to hot surface.

Warning

This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.

Caution

This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.

Note

This signal word indicates important information (e.g.
material damage), but does not indicate hazards.

Info

Information marked with this symbol helps you to carry
out your tasks quickly and safely.

Follow the manual

Information marked with this symbol indicates that the
instructions must be observed.

Wear hearing protection

Information marked with this symbol indicates that you
should wear hearing protection.

Wear safety glasses

Information marked with this symbol indicates that you
should wear eye protection.

Wear a protective mask

Information marked with this symbol indicates that you
should wear a protective mask.

Wear protective clothing

Information marked with this symbol indicates that you
should wear protective clothing.

Wear protective gloves

Information marked with this symbol indicates that you
should wear protective gloves.

You can download the current version of the instructions and
the EU declaration of conformity via the following link:

PHDS 11-20V

https://hub.trotec.com/?id=39789

Safety

General Power Tool Safety Warnings

Warning
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.

Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.

Save all warnings and instructions for future
reference.

This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
The term 

power tool

 in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)
power tool.

Summary of Contents for PHDS 11-20V



















Reviews: