EN
11
cordless hammer drill PHDS 11-20V
Checking the battery status
The battery status is displayed as follows by the three LEDs of
the battery level indication (14):
LED colour
Meaning
Green – Orange – Red
maximum charge / power
Orange – Red
medium charge / power
Red
weak charge – Recharge the
battery.
1. Press on the battery icon (18) on the battery (8).
ð
You can read the battery status from the battery level
indication (14).
14
18
Mounting the handle
Info
Use the supplied anti-vibration handle for safe and
precise guiding.
The anti-vibration handle (12) should be mounted before start-
up.
To do so, please proceed as follows:
1. Screw the anti-vibration handle (12) clockwise into the
threading either to the left- or right-hand side of the
housing.
12
2. Check the anti-vibration handle (12) for tight fit.
3. For the disassembly unscrew the anti-vibration handle (12)
counter-clockwise.
Tool change
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
The device is equipped with a fully automatic spindle lock.
When the tool is at a standstill, the motor's drive train is locked
so that the keyless drill chuck can be opened. Please proceed
as follows to remove or insert tools:
1. Set the switch for clockwise / counter-clockwise
rotation (4) to centre position (lock).
2. Turn the keyless drill chuck (1) counter-clockwise to open
it.
3. If necessary, take the (drill) bit out of the drill chuck.
4. Insert the appropriate (drill) bit into the drill chuck.
5. Tighten the keyless drill chuck (1) by turning clockwise.
