EN
7
radiant heater IR 2400
The following is required for installation:
•
a pencil for marking the drill holes
•
a tape measure for determining the distances
•
a suitable drill
•
a drill suitable for the wall material, Ø 6 mm.
•
a wrench SW 10 mm
•
a spirit level
1. Mark the drill holes on the wall according to the following
pattern:
ð
Please note that the device must be mounted in
horizontal position. Use a spirit level for this purpose.
2. Drill the holes into the wall at the marked positions.
3. Insert the wedge bolts included in the scope of delivery
into the holes without the nuts and washers.
4. Position the mounting brackets of the device over the
threads of the wedge bolts and secure the mounting
brackets with the washers and the nuts.
5. Use a wrench to tighten the nuts firmly.
6. Make sure that the device is attached securely.
7. Loosen the star screws (
8
) on both sides of the device and
tilt the device to the desired angle. Observe the different
inclination angles.
ð
When mounting the device on a wall, only align the
device downwards at an angle of 30° to 45°.
8
8. Once the device is at the desired inclination angle,
retighten the star screw (
8
) on both sides of the device.
Start-up
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that there are no curtains or similar objects in
the immediate vicinity.
Prior to initial start-up, insert batteries in the remote control.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
