EN
18
Operating manual – 3-in-1 multi-function sander PMSS 10-200
Cleaning / changing the filter insert of the dust collector
The filter insert has to be cleaned as soon as it is dirty. Check
the filter insert for dirt once or twice a year.
The filter insert should be exchanged in case of heavy soiling or
damage.
1. Remove the filter retainer with the filter insert from the
dust collector cover.
2. Clean the filter insert with warm water mixed with a
neutral cleaning agent.
3. Allow the filter insert to dry completely. Do not put a wet
filter insert into the dust collector!
4. Fit the filter retainer with the filter insert back into the dust
collector cover.
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
