EN
7
electric heater TDS 20 R / TDS 30 R / TDS 50 R
Operation
•
Avoid open doors and windows.
Control panel
TDS 20 R
kW
TDS 20 R
3 kW
6
7
TDS 30 R
TDS 30 R
5 kW
kW
6
7
TDS 50 R
TDS 50 R
9 kW
kW
6
7
No.
Designation
6
Selection switch for ventilation and heating levels
0
: The device is switched off.
: ventilation only
: heating level 1
: heating level 2
7
Rotary switch room thermostat
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
Setting the heating level
1. Set the selection switch (6) to the desired heating level.
Setting the room thermostat
1. Select the desired temperature via the stepless rotary
switch (7) of the room thermostat.
The room thermostat controls the room temperature
automatically:
TDS 20 R
•
When exceeding the set value, both the heating and the
ventilation will be switched off.
TDS 30 R / TDS 50 R
•
When the set value is exceeded, the heating switches off
while the fan keeps running until the heater has cooled
down sufficiently. As soon as the heater has cooled down
sufficiently, the heater will be switched back on.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Turn the selection switch (6) to ventilation mode .
•
Keep the fan running for 3 minutes before switching the
device off.
•
Switch off the device by setting the selector switch (6) to
position
0
.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Allow the device to cool down completely.
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Storage chapter.