7
EN
Operating manual – dehumidifier / climate manager DH 30 VPR+ / DH 60 VPR+
3. Remove the housing.
4. Mark the position for the bore holes.
5. Drill the holes into the wall.
6. Insert suitable dowels into the bore holes.
7. Fasten the wall holder in place.
8. Suspend the device from the wall holder by means of the
mounting brackets. Utilize the help of one or two other
persons as well as suitable lifting gear to do so.
9. Put the housing back on the device.
10. Fasten the housing to the device.
Storage
Drain any possibly remaining condensate.
When the device is not being used, observe the following
storage conditions:
•
in an upright and stable position.
•
dry and protected from frost and heat.
•
protected from dust and direct sunlight.
•
with a cover to protect it from invasive dust, if necessary.
