EN
3
vane anemometer BA06
Intended use
Only use the device for measurements of the air velocity within
the measuring range specified in the technical data. Observe
and comply with the technical data.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Improper use
Do not use the device in potentially explosive atmospheres, for
measurements in liquids or at live parts.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personnel qualifications
People who use this device must:
•
have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
By making use of the anemometer air velocities can be
determined in various units:
•
metres per second (m/s)
•
kilometres per hour (KPH)
•
feet per minute (FPM)
•
miles per hour (MPH)
•
nautical miles per hour in knots (KNT)
Further available for the assessment of the measurements is a
MAX/AVG function (maximum and average value).
The display illumination is automatically activated in poor
lighting conditions.
When not in use, an automatic switch-off saves the battery.
Device depiction
3
4
1
2
7
6
5
No.
Designation
1
Vane with sensor
2
MAX/AVG
button
3
Tripod thread
4
Battery compartment cover
5
Display
6
Light sensor
7
Power button
