EN
10
Operating manual – humidifier B 24 E / B 25 E
2. Open the Velcro® fastener at the evaporation filter.
3. Remove the evaporation filter from the filter frame.
4. Dispose of the used evaporation filter according to the
national regulations.
5. Attach the new evaporation filter on the filter frame and
reinsert the evaporation filter.
6. Place the upper part correctly onto the water tank.
ð
The electronic equipment and the fan in the upper part
must not get wet.
7. Reconnect the device and switch it on.
8. Press the
Dimmer
button (9) for approx. 3 to 5 s to carry
out a filter reset.
ð
The
Filter
LED (8) stops flashing and is permanently
illuminated again.
Activities required after maintenance
If you want to continue using the device:
•
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
•
Store the device according to the Storage chapter.
Technical annex
Technical data
Parameter
Value
Model
B 24 E / B 25 E
Max. evaporation performance 8.4 l / 24 h
Mains connection (adapter)
1/N ~ 240 V 50 Hz / 60 Hz
Max. power input
6 W
Supply voltage
12 V
Nominal current consumption 0.2 A
Output voltage of adapter
12 V
Output current of adapter
0.4 A
Sound pressure level
(at a distance of 1 m)
58 dB(A)
Water tank capacity
3 l
Dimensions
(width x height x length)
248 x 248 x 305 mm
Weight
2.5 kg
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
