14
EN
air cleaner AirgoClean® 250 E
4. Dispose of the HEPA carbon filter according to the national
regulations.
5. Take the new HEPA carbon filter out of the plastic cover.
6. Insert the new HEPA carbon filter (
26
) into the device.
Make sure that the strips (
25
) are positioned on the
outside.
26
25
7. Reinsert the prefilter (
24
) into the device.
24
8. Put the air inlet (
3
) back on the device.
3
9. Press the
Ionizer
button (
10
) for 3 seconds to reset the
HEPA carbon filter or prefilter.
Cleaning the pre-filters
If the
Prefilter degree of contamination
LED (
20
) lights up and
the indication
Clean
appears, the prefilters must be cleaned (see
chapter Operation and chapter Errors and faults).
Please proceed as follows on both sides of the device:
1. Remove the prefilter (
24
) from the device.
24