6
EN
air cleaner AirgoClean® 170 E
Operation
Note
Avoid open doors and windows.
Control panel
13
11
10
9
7
8
6
12
No.
Designation
Meaning
6
Operating mode
LEDs
Indicates the selected
operating mode:
=
automatic mode
=
night mode
=
turbo mode
7
Segment display
Indicates the measured air
quality
8
Air quality
LED
Is illuminated according to
the air quality:
green = good
blue = medium
red = poor
9
Operating mode
button
Selecting the operating
mode
10
Power
button
For switching the device on
and off
11
Fan speed
button
Setting the fan speed in
5 stages
12
Fan speed
LED
Indication of the selected
fan speed
13
Filter change
LED
Illuminated when the filter
needs to be changed
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on. When the power
cable has been connected, the control panel lights up for
2 seconds and an acoustic signal is emitted. Afterwards, only
the
Power
button (
10
) is illuminated in red and the device is in
standby mode.
Please proceed as follows to switch the device on:
1. Press the
Power
button (
10
).
ð
The
Power
button (
10
) is illuminated in white.
ð
The device is switched on and starts operating in
automatic mode. The corresponding operating
mode LED (
6
) will be illuminated.
ð
The device measures the air quality within 3 minutes.
The
air quality
LED (
8
) is illuminated. The air quality will
be indicated on the segment display (
7
).
If no operational input is made for approx. 40 seconds, the
brightness of the control panel decreases. The full brightness
will be restored the next time you make an entry.
Setting the operating mode
The device comes with the following operating modes:
•
Automatic mode
•
Night mode
•
Turbo mode
Please proceed as follows to switch between operating modes:
ü
The device is switched on.
1. Press the
operating mode
button (
9
).
ð
The corresponding
operating mode
LED (
6
) will be
illuminated.
Automatic mode
Once you switch on the device, it starts in automatic mode. The
corresponding
operating mode
LED (
6
) will be illuminated.
When in automatic mode, the device automatically detects the
air quality.
The
air quality
LED (
8
) is illuminated accordingly in green, blue
or red. The air quality will be indicated on the segment
display (
7
).
The PM2.5 value will be indicated on the segment display (
7
)
after the device has carried out the air quality measurement.
Air quality
LED Indication on the
segment display
Fan speed
LED
Illuminated in
green
(good air quality)
0 ~ 35
Stage 2
Illuminated in
blue
(medium air
quality)
36 ~ 116
Stage 3 and 4
Illuminated in red
(poor air quality)
> 116
Stage 4 and 5