10
EN
cordless high-pressure cleaner PPWS 10-20V
Connection with garden hose to water inlet (optional)
According to valid regulations, the high-pressure cleaner must
not be connected to the drinking water network without a
system separator. Use a suitable system separator in
compliance with EN 12729 type BA.
If the water used flows through a system separator, it is no
longer drinkable. You can purchase a system separator in the
specialist trade.
A system separator prevents water and detergent from flowing
back into the drinking water pipeline.
•
Use a commercially available garden hose for the water
inlet and make sure it is long enough.
•
Use the device on a domestic water connection with a
maximum pressure of 5 bar.
1. Remove the quick coupling (
20
) from the water hose.
2. Connect the garden hose to the water supply.
3. To vent the garden hose, open the tap and let the water
flow until it comes out at the other end without producing
any bubbles.
4. Stop the water flow.
5. Connect the quick coupling (
20
) to the garden hose again.
6. Connect the garden hose (
14
) to the hose connection (
4
) on
the device.
4
Info
If you have connected a different quick coupling with
water stop function to your water supply, remove the
quick coupling before venting. Vent without the quick
coupling and reconnect it again afterwards.
Installing the multi-function nozzle/spray attachment
1. Insert the spray lance (
11
) with the multi-function
nozzle (
10
) into the device first and turn it until it reaches
the lock (bayonet catch). The spray attachment with the
detergent container (
5
) is installed in the same way.
10
11
2. Disassembly is carried out in reversed order.
10
11
