![Trotec 4450000031 Instruction Manual Download Page 15](http://html1.mh-extra.com/html/trotec/4450000031/4450000031_instruction-manual_1172307015.webp)
EN
15
Cordless random orbital sander PESS 10-20V
The non-binding values listed in the table below shall serve as a
point of reference for selecting the right sanding sheet for the
task at hand:
For processing paint and lacquer
layers or primers such as filler and
spackle
Grain size: 40 – 240
For grinding off paint
coarse
40, 60
For sanding primer paint
medium
80, 120
For final sanding of primers before
lacquering
fine
180, 240
For processing any wood-based
material
grain size: 40 – 240
For pre-grinding e.g. of rough,
unplaned beams and boards
coarse
40, 60
For surface grinding and levelling of
small irregularities
medium
80, 100,
120
For fine and finish grinding of hard
wood
fine
180, 240
Switching the device on and off
Wear your personal protective equipment when working with
the device.
Warning
The event of a temporary power failure can lead to
the device accidentally switching on.
Even if there is no voltage present, always switch the
device off using the on/off switch.
Hold onto the mains plug while pulling the power cable
out of the mains socket.
1. Slide the on/off switch (
15
) to
I
.
15
2. Position the device on the workpiece.
3. Lift the device off the workpiece before you switch it off.
4. To switch the device off, slide the on/off switch (
15
) to
0
.
15
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Hold onto the mains plug while pulling the power cable of
the charger out of the mains socket.
•
Remove the battery from the device (see Start-up chapter).
•
If attached, disconnect the dust extraction system from the
device.
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Transport and storage
chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the instructions.
Using insertion tools or accessories other than those
specified in the instructions may cause a risk of injury.
Designation
Article number
Multiflex 20V 2.0 Ah spare battery
6.200.000.303
Multiflex 20V 4.0 Ah spare battery
6.200.000.320