EN
7
radiant heater IR 2200
Installation
When installing the device, observe the minimum distances
from walls and other objects as described in the Technical data
chapter.
•
Do not install the device directly behind a door.
•
Never install the device in a way that it radiates directly
onto walls or other objects. Observe the minimum
distances from walls or other objects according to the
Technical data chapter.
•
For wall mounting, install the device in a horizontal
position.
•
Please note that the minimum distance to the front also
applies to objects mounted on the ceiling, e.g. fans, lamps
or sprinkler systems.
C
A
B
D
C
The following is required for installation and mounting:
•
a pencil for marking the drill holes
•
a tape measure for determining the distances
•
a suitable drill
•
a screwdriver
•
a spirit level
Wall mounting
1. Mark the drill holes on the wall:
ð
Please note that the device must be mounted in
horizontal position.
ð
Use a spirit level for this purpose.
2. Drill the drill holes into the wall at the marked positions.
