EN
7
convector TCH 25 E / TCH 26 E
Operation
Operating elements
6
8
7
9
10
11
12
13
No.
Designation
6
rotary switch room thermostat
7
flip switch heating levels 750 W
(together with flip switch 8 = 2000 W)
8
flip switch heating levels 1250 W
(together with flip switch 7 = 2000 W)
9
flip switch turbo blower
10
timer switch
11
timer indicator
12
timer control
13
timer segments
Switching the device on
1. Plug the device into a sufficiently fused socket.
2. Set the flip switch (7, 8) to
On
to select the desired heating
capacity.
You can actuate one flip switch for a capacity of 750 W (7)
or 1250 W (8), or both flip switches for the maximum
capacity of 2000 W.
ð
If the temperature of the room thermostat is set above
the current room temperature, the respective lamps of
the heating levels light up.
3. When using the optional timer:
Set the timer control (12) to
I
.
Setting the room thermostat
1. Select the desired temperature via the infinitely variable
rotary switch (6) of the room thermostat.
ð
If the temperature of the room thermostat is set above
the current room temperature, the respective lamps of
the heating levels light up.
The room thermostat controls the room temperature
automatically:
•
When the set value is exceeded, the heating switches off.
•
When the set value is fallen below, the heating
automatically switches back on.
Frost monitor function:
•
Turn the thermostat to the
*
marking (snowflake). In this
position, the room thermostat switches on the heating
automatically if the room temperature drops below the
frost protection temperature.
Switching on the turbo blower
1. Set the flip switch for the fan (9) to
On
.
ð
The fan starts running if the room thermostat is
switched on.
ð
To distribute warm air, switch on the desired heating
level.
ð
If the temperature of the room thermostat is set above
the current room temperature, the respective lamps of
the heating levels light up.
ð
At high room temperatures you can use the device to
distribute cold air. To do so, switch off the heating
levels.
