EN
7
condenser dryer DH 95 S
Positioning the condensation drain hose
ü
A suitable hose (diameter: 8 mm) is ready for use.
ü
The device is switched off.
1. Connect the condensation drain hose to the condensation
hose connection (7) at the device.
2. Make sure that the condensation drain hose is properly
connected to the device and free of damage.
3. Depending on the application, position the end of the
condensation drain hose as follows:
ð
Place a sufficiently dimensioned container (at least
90 litres) beside the device and insert the hose end.
Check the filling level of the container regularly.
ð
Position the end of the condensation drain hose above a
water drain. For larger distances, a longer hose of the
same type can also be used.
