4
EN
air cleaner TAC 750 E
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Do not touch the mains plug with wet or damp hands.
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
Risk of injury from parts being whirled up!
Before switching the device on, make sure that there
are no loose parts (clothing, hair ...) located near the
air inlet or outlet!
Note
Do not operate the device without an air filter inserted
into the air inlet!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Behaviour in the event of an emergency
1. Switch off the device.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
Air cleaners are used to filter the room air. On building sites and
renovation areas high concentrations of dust can arise, for
instance when using angle grinders or during blasting, chiselling
or demolition operations as well as when mixing dry mortar or
tile cement.
Depending on the inserted filter, the air cleaners of the
TAC series serve to eliminate various dusts, e.g. from asbestos,
building rubble, quartz, flour, wood, etc., but also mould spores,
paint particles and mineral fibres in the air, possibly arising
during the above-mentioned operations.
This dust is to be vacuumed off as close as possible to the point
of origin in order to reduce the pollution of the breathing air to a
minimum. Depending on the used filter quality it is permissible
to employ the device for the separation of quartziferous mineral
dusts, wood dust, lead-containing dusts, artificial mineral fibres
or high-temperature fibres.
Application as vacuum generator for mould remediation and
asbestos abatement is also a possibility. In case of other
hazardous substances there are additional requirements; hence
observe the corresponding Technical Rules for Hazardous
Substances (TRGS) or the country-specific regulations.
The device is suited for:
•
producing a vacuum in a room, e.g. in heavily
contaminated spaces;
•
air purification in workspaces via air circulation, e.g. indoor
building sites, workshops etc.;
•
producing overpressure in a room, e.g. cleanroom;
•
supplying filtered fresh air.
The device is structured as follows:
•
housing with stacking aid
•
adjustable fan for air transport
•
filter monitoring for air volume flow
The device may be equipped with various filters. It provides the
user with the possibility of configuring both the filter quality and
the filter chain arrangement for the respective field of
application. The filters must be selected according to the area of
application.
The device is approvable for asbestos abatement as per
TRGS 519, dust class H.
Info
The filters are not included in the scope of delivery!
Choose the filters according to the area of application
from our filter range. Insert the selected filters prior to
initial start-up.
