R9T12FIRE
Page 5 of 16
Rev. H 06SEP17
WARNING:
The LP Gas tank or
cylinder used must comply with the following
requirements. Use of other tanks or cylinders
which do not meet these requirements may
create an unsafe condition which could cause
injury or death to you, or damage to your
personal property, including the risk of fire or
explosion.
The cylinder or tank used must be:
1. Constructed and marked in accordance with the U. S. Department of Transportation
(D.O.T.) Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and
Tubes for Transportation of Dangerous Goods and Commission, CAN/CSA-B339 as
applicable;
2. Provided with a Listed overfilling prevention device; and
3. Provided with a cylinder connection device compatible with the connection for the appliance.
IMPORTANT:
The LP Gas tank must be secured in the fire pit.
For 401400RD and 401400SQ bases, place the tank in the tank retaining ring.
For 401700RCT base, slide horizontal LP gas tank along middle support until the back mounting
bracket of the tank hits the back of the slot. Line up the hole in the front mounting bracket and the
post on the front brace, then place the tank on top of the front brace.
DANGER
Do not use a vertical LP gas tank in place of a horizontal LP gas tank in
401700RCT
base models.
R9T12FIRE
Page 5 of 16
Rev. H 06SEP17
WARNING:
The LP Gas tank or
cylinder used must comply with the following
requirements. Use of other tanks or cylinders
which do not meet these requirements may
create an unsafe condition which could cause
injury or death to you, or damage to your
personal property, including the risk of fire or
explosion.
The cylinder or tank used must be:
1. Constructed and marked in accordance with the U. S. Department of Transportation
(D.O.T.) Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and
Tubes for Transportation of Dangerous Goods and Commission, CAN/CSA-B339 as
applicable;
2. Provided with a Listed overfilling prevention device; and
3. Provided with a cylinder connection device compatible with the connection for the appliance.
IMPORTANT:
The LP Gas tank must be secured in the fire pit.
For 401400RD and 401400SQ bases, place the tank in the tank retaining ring.
For 401700RCT base, slide horizontal LP gas tank along middle support until the back mounting
bracket of the tank hits the back of the slot. Line up the hole in the front mounting bracket and the
post on the front brace, then place the tank on top of the front brace.
DANGER
Do not use a vertical LP gas tank in place of a horizontal LP gas tank in
401700RCT
base models.
R9T12FIRE
Page 5 of 16
Rev. H 06SEP17
WARNING:
The LP Gas tank or
cylinder used must comply with the following
requirements. Use of other tanks or cylinders
which do not meet these requirements may
create an unsafe condition which could cause
injury or death to you, or damage to your
personal property, including the risk of fire or
explosion.
The cylinder or tank used must be:
1. Constructed and marked in accordance with the U. S. Department of Transportation
(D.O.T.) Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and
Tubes for Transportation of Dangerous Goods and Commission, CAN/CSA-B339 as
applicable;
2. Provided with a Listed overfilling prevention device; and
3. Provided with a cylinder connection device compatible with the connection for the appliance.
IMPORTANT:
The LP Gas tank must be secured in the fire pit.
For 401400RD and 401400SQ bases, place the tank in the tank retaining ring.
For 401700RCT base, slide horizontal LP gas tank along middle support until the back mounting
bracket of the tank hits the back of the slot. Line up the hole in the front mounting bracket and the
post on the front brace, then place the tank on top of the front brace.
DANGER
Do not use a vertical LP gas tank in place of a horizontal LP gas tank in
401700RCT
base models.
R9T12FIRE
Page 5 of 16
Rev. H 06SEP17
WARNING:
The LP Gas tank or
cylinder used must comply with the following
requirements. Use of other tanks or cylinders
which do not meet these requirements may
create an unsafe condition which could cause
injury or death to you, or damage to your
personal property, including the risk of fire or
explosion.
The cylinder or tank used must be:
1. Constructed and marked in accordance with the U. S. Department of Transportation
(D.O.T.) Specifications for LP-Gas Cylinders, or the Standard for Cylinders, Spheres and
Tubes for Transportation of Dangerous Goods and Commission, CAN/CSA-B339 as
applicable;
2. Provided with a Listed overfilling prevention device; and
3. Provided with a cylinder connection device compatible with the connection for the appliance.
IMPORTANT:
The LP Gas tank must be secured in the fire pit.
For 401400RD and 401400SQ bases, place the tank in the tank retaining ring.
For 401700RCT base, slide horizontal LP gas tank along middle support until the back mounting
bracket of the tank hits the back of the slot. Line up the hole in the front mounting bracket and the
post on the front brace, then place the tank on top of the front brace.
DANGER
Do not use a vertical LP gas tank in place of a horizontal LP gas tank in
401700RCT
base models.
K
305251_R9T12FIRE.indd 5
9/14/17 2:18 PM
