14
Transporting and Storage
TRANSPORTING THE ICE AUGER
1. Never transport engine inside an enclosed space or vehicle. Fuel
or fuel vapors may ignite causing serious injury or death.
2. If fuel is present in the fuel tank, transport in an open vehicle in
an upright position with the gas cap facing upwards.
3. If an enclosed vehicle must be used, remove gas into an
approved red fuel container. DO NOT siphon by mouth.
4. Run engine to use up the fuel in the carburetor and fuel tank.
Always run engine in a well ventilated area.
5. Wipe away any spilled fuel from engine and allow to dry.
PREPARING FOR LONG TERM STORAGE
1. Add fuel stabilizer according to manufacturer’s instructions.
2. Run engine for 10-15 minutes to ensure stabilizer reaches
carburetor.
3. Remove remainder of fuel from gas tank into an approved
container.
4. Remove auger from powerhead and apply a thin layer of grease
to the output shaft.
5. Store auger and powerhead (engine) in a vertical position.
6. Remove all debris from auger and powerhead (engine).
7. Attach blade protector to bottom of auger.
Maintenance
AIR FILTER MAINTENANCE
Never run engine without air cleaner properly installed.
Added wear and engine failure may occur if air cleaner is not
installed on engine.
Steps for Cleaning Air Filter
1. Wash in warm water with mild soap until dirt and debris are
removed. Press filter when washing, do not twist.
2. Rinse in warm water until soap and dirt are removed.
3. Dry filter by wrapping in a clean cloth and pressing filter until it is
dry.
4. Attach the filter and air cleaner cover to the engine.
!
WARNING
