Assembly material specification and quantity
：
basic frame
1pcs
Belt
2pcs
Ties
Step 5
：
Belts assembly
4-M3*3
8
Synchronous wheel
Synchronous wheel
Note: When the machine prints normally
after assembly.If the belt is too loud when
moving,The height of the left and right
wheel assembly can be adjusted by
increasing and reducing the gaskets.
During the printing process, the leather belt
has a slight sound, which is normal.
Left and right wheels
Belt tying diagram
X motor
Y motor
1.As shown in the figure, after
adjusting the distance between
the motor gear and the belt, lock
the 2 rice screws on the gear.
2. Also assemble the second belt,
the tension of the second belt
should be equal.
Note: Synchronization wheels on X, Y axis motors
Height should be adjusted by itself.
Be sure to install the belt
Each belt is on the same planeUp.
Location of Print Head Band
Summary of Contents for X5SA-500-PRO
