Important Safety Instructions
SAVE THESE SAFETY INSTRUCTIONS AND USER’S GUIDE.
These Safety
Instructions should be followed during installation, operation and
maintenance of Tronix Explorer XT.
General Safety
-
Do NOT expose the Tronix Explorer XT to dust, moisture, liquids,
rain or snow.
-
Do NOT block ventilation openings of the Tronix Explorer XT;
Overheating may occur. Do NOT place the Tronix Explorer XT in a
compartment with zero clearance.
-
Not recommended attachments, when used with Tronix Explorer
XT, may result in risk of fire, electrical hazard or injury.
-
Periodically observe the status of the LED indicators to make sure
that Tronix Explorer XT works as intended.
Electrical Safety
-
Always connect Tronix Explorer XT to a grounded outlet. The
socket outlet to which the product is connected must be in close
proximity and must be easily accessed.
-
Flash units and other supported equipment must be properly
connected to Tronix Explorer XT. As with Tronix Explorer XT's
connection to the socket outlet, connections of the equipment to
the product must be easily accessed.
-
Always turn OFF and unplug Tronix Explorer XT before doing any
maintenance.
-
Tronix Explorer XT incorporates multiple power sources. Only
connect ONE of these sources at a time. Though not posing any
danger, simultaneous connection of any of these sources is NOT
recommended. Disconnect ALL power cords to completely remove
power from the unit.
