- 6 -
Troubleshooting
The Battery Charger displays no functions
• Check to see if the power cable is correctly
inserted into the power socket.
• Check to see if the power socket is „live“. To do
this, connect a different, functioning electrical
appliance to the socket.
The inserted batteries are not being charged
• Check that the batteries are being inserted in
accord with their polarity.
• Check that batteries suitable for charging have
been inserted into the Battery Charger. Suitable
for charging are exclusively rechargable Ni-Cd
and Ni-MH batteries of the types AAA/AA/C/D
and 9 V Block batteries.
• Remove the power cable from the power socket
and allow the appliance to cool down, as the
temperature monitoring has possibly activated
itself. Temperature monitoring ensures that the
charging process is broken off as soon as a bat-
tery reaches an excessively high temperature.
Other malfunctions
Make contact with one of our service partners close
to you if:
• the malfunction cannot be corrected as
described above,
• or, when operating the Battery Charger, other
malfunctions occur.
Cleaning
Danger! Disconnect the power cable before
cleaning. There is the risk of receiving an
electric shock! Ensure that moisture cannot
penetrate into the device during cleaning!
Clean the housing of the Battery Charger only with
a dry cloth. For stubborn soiling use a slightly damp
cloth.
Under no circumstances use moisture to clean the
interior of the charger. Instead, use a soft and clean
brush to clean the insides. DO NOT use abrasive or
chemical cleaning agents.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved
dis-posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Battery disposal!
Batteries may not be disposed of with normal
domestic waste. All consumers are statutorily obliged
to dispose of batteries at the collection point in their
community/district or with the original supplier.
The purpose of this obligation is to ensure that
batteries can be disposed of in an environmentally
friendly manner. Only dispose of batteries when
they are fully discharged.
Dispose of all packaging materials in an
environmentally responsible manner.
IB_55984_TLG500A1_LB7.qxd 01.10.2010 10:25 Uhr Seite 6
Summary of Contents for TLG 500 A1
Page 2: ...TLG 500 A1 3 1 1 2 3 4 2 5 6 CV_55984_TLG500A1_LB7 qxd 01 10 2010 8 28 Uhr Seite 4 ...
Page 10: ... 8 ...
Page 18: ... 16 ...
Page 34: ......