background image

10

GETTING TO KNOW YOUR REMOTE 

 

Level

 

Indicator

 

Light

    

 

 

The Level Indicator Light [                     ] will display the 
current level.  

 

The 

water pressure adjustment, spray wand position 

adjustment, and the temperature adjustments

 have 

four gear positions: Close, Low, Mid, and High. When 
you successfully change from one level to the other 
the light indicator changes position and you hear one 
beep. If you hear two beeps you have reached the 
maximum or minimum level.  

 

 

 

 

 

 

 

 

 

GETTING TO KNOW YOUR LID & SEAT 

 

 

Opening and Closing the lid 

There are four methods to open and close the lid. These methods 

include (1) by hand, (2) using the remote, (3) using the foot sensor 

and (4) automatically. 

 

Method 1: Using your hand you can open or close the lid.  

R

 

Note: Do not interrupt the lid opening or closing 

with your hand if it is moving via another method. This 
can cause the gears to break. 

 

Method 2: Press the Lid button to open or close the lid.  

R

 

Note: If the seat is also open, it will close the seat 

and the lid together.  

High

Mid

Low

Close

Summary of Contents for Tahum TETBCERN-12.WH





























Reviews: