Tronair 02-7833C0110, Operation & Service Manual

Page: 5 / 42

Models: 02-7833C0110, 02-7846C0110, 02-7852C0100,02-7861C0100, 02-7861-9100,
02-7863C0100, 02-7902C0100, 02-7918C0100, 02-7918C9100
12 Ton (10.8 Metric Ton) Axle Jack
05/2021 | Rev. 03 Page | 2
2.0 SAFETY INFORMATION
2.1 USAGE AND SAFETY INFORMATION
To insure safe operations please read the following statements and understand their meaning. Also refer to your equipment
manufacturer’s manual for other important safety information. This manual contains safety precautions which are explained
below. Please read carefully.
WARNING!
— Warning is used to indicate the presence of a hazard that
can cause severe personal injury,
death, or substantial property damage if the warning notice is ignored.
CAUTION!
— Caution is used to indicate the presence of a hazard that
will or can cause minor personal injury
or property damage if the caution notice is ignored.
3.0 ASSEMBLY INSTRUCTIONS
3.1 GENERAL INFORMATION
This product should be assembled and/or repaired using good workmanship practices and proper tools.
All replacement parts must be the same as or equal to the original parts supplied.
3.2
PRE-USE CHECKS
Refer to the Illustrated Parts List to identify and ensure that all parts are present.

Generally check over unit to assure the tightness of all nuts, bolts and screws.

With rams completely collapsed, check to see if the hydraulic pump reservoir is filled with hydraulic fluid. Replenish with
MIL-PRF-5606 fluid as required.
4.0 TRAINING
4.1 TRAINING REQUIREMENTS
The employer of the operator is responsible for providing a training program sufficient for the safe operation of the unit.
4.2
TRAINING PROGRAM
The employer provided operator training program should cover safety procedures concerning use of the unit in and around the
intended aircraft at the intended aircraft servicing location.
4.3
OPERATOR TRAINING
The operator training should provide the required training for safe operation of the unit.
NOTE: Maintenance and Trouble Shooting are to be performed by a skilled and trained technician.