background image

Models:  02-1040C0111 & 02A1040C0111 

10 Ton (8.93 Metric Ton) Single Stage Jack 

 

12/2020 | Rev. 02 

Page | 10 

 

11.0 

PROVISION OF SPARES 

11.1 

SOURCE OF SPARE PARTS 

Spare parts may be obtained from the manufacturer: 

TRONAIR

, Inc. 

Telephone:  (419) 866-6301 or 800-426-6301 

1 Air Cargo Pkwy East 

Fax: 

(419) 867-0634 

Swanton, Ohio  43558 USA 

E-mail: 

[email protected] 

 

Website: 

www.tronair.com 

 
11.2 

RECOMMENDED SPARES TO BE KEPT ON HAND 

K-1050 

Kit, Ram Seal Replacement 

HK-1685 

Kit, Repair Fluid Seal (Air Option only) 

HK-1686 

Kit, Repair Air Seal (Air Option only) 

K-3441 

Kit, Pump Seal Replacement 

 

12.0 

IN-SERVICE SUPPORT 

Contact Tronair, Inc. for technical services and information. See Section 1.3 

 Manufacturer. 

 

13.0 

GUARANTEES/LIMITATION OF LIABILITY 

Tronair products are warranted to be free of manufacturing or material defects for a period of one year after shipment to the 
original customer. This is solely limited to the repair or replacement of defective components. This warranty does not cover the 
following items: 

a)  Parts required for normal maintenance 
b)  Parts covered by a component manufacturers warranty 
c) 

Replacement parts have a 90-day warranty from date of shipment 

If you have a problem that may require service, contact Tronair immediately. Do not attempt to repair or disassemble a product 
without first contacting Tronair, any action may affect warranty coverage. When you contact Tronair be prepared to provide the 
following information: 

a)  Product Model Number 
b)  Product Serial Number 
c) 

Description of the problem 

If warranty coverage is approved, either replacement parts will be sent or the product will have to be returned to Tronair for 
repairs. If the product is to be returned, a Return Material Authorization (RMA) number will be issued for reference purposes 
on any shipping documents. Failure to obtain a RMA in advance of returning an item will result in a service fee. A decision on 
the extent of warranty coverage on returned products is reserved pending inspection at Tronair. Any shipments to Tronair must 
be shipped freight prepaid. Freight costs on shipments to customers will be paid by Tronair on any warranty claims only. Any 
unauthorized modification of the Tronair products or use of the Tronair products in violation of cautions and warnings in any 
manual (including updates) or safety bulletins published or delivered by Tronair will immediately void any warranty, express or 
implied. 
 
The obligations of Tronair expressly stated herein are in lieu of all other warranties or conditions expressed or implied. 

Any 

unauthorized modification of the Tronair products or use of the Tronair products in violations of cautions and 
warnings in any manual (including updates) or safety bulletins published or delivered by Tronair will immediately 
void any warranty, express or implied 
and Tronair disclaims any and all liability for injury (WITHOUT LIMITATION and 
including DEATH), loss or damage arising from or relating to such misuse
.

 

 

14.0 

APPENDICES 

APPENDIX I 

Hydraulic Schematic 

APPENDIX II 

Haskel Air Pump Manufacturer Data 

APPENDIX III 

Safety Data Sheet 

– MIL-PRF-5606 Hydraulic Fluid 

APPENDIX IV 

Declaration of Conformity 

APPENDIX V 

Maintenance Schedule 

 

 

Summary of Contents for 02-1040C0111








































































Reviews: