3.1.1 Find the barcode sticker at the end of the manual, enter
the frame code on the sticker or scan the barcode to bind the
vehicle to become the owner.
3.1.2 Scan the “Shared QR Code” (My – Select vehicle – Click
“Vehicle Identification Number”) of vehicle owner to bind the
vehicle. Each user can bind 8 vehicles maximum, each vehicle
can be bound to 5 accounts (including vehicle owner).
3.1.3 Click the vehicle binding management page, in which, the
vehicle unbinding can be done.
a.When the network of mobile phone and vehicle is normal, click the “Anti-theft alarm” switch on the left side to turn on or
off the alarm. Turn on the anti-theft alarm to activate the alarming device; turn off the anti-theft alarm to deactivate the
alarming device.
b. When the network of mobile phone and vehicle is abnormal, after clicking the “anti-theft alarm” switch, the system will
require you to use Bluetooth connection. After the successful connection, user can implement the operation again.
4. Replacement of VCU
Only the vehicle owner can replace the VCU. The replacement procedure is as follows: My – Select vehicle – “VCU version” –
“Scan QR code to replace the VCU equipment”.
Scan the
shared code
Bind vehicle
Bind vehicle
Shared
code
Unbind
Unbind
Vehicle Binding &
Unbinding
app-primary account
app-sub account
3.1 Vehicle binding and unbinding
Click “+ Bind vehicle” in the vehicle list:
3. Anti-theft alarm
Pre-ride Inspection
：
1.Check whether the head lock is unlocked, and whether the handlebar is flexible without retardation.
2.Check whether the handlebar is firmly fastened, and whether the left and right handlebar switches work normally.
3.Check whether the rearview mirrors are fastened, and in proper angle, whether they are clean enough, and assure the
people and vehicles within the rear 10 meters can be seen clearly.
4.Check whether the tire pressure is within the specified range.
5.Check whether the tire surface has crack or damage, and whether the tread depth is greater than 0.8mm.
6.Ensure that the instrument and mobile phone App have no fault warning after switching on.
7.Check whether the battery is fully charged.
8.Check whether the headlight, tail light and front, rear, left & right turn signal lights work normally.
9.Check whether the horn works normally.
10.Check whether the brake oil is sufficient, and whether the brake handle and brake system work normally.
11.If there is any abnormality, please contact our customer service center.
Scan the QR code at
the end of the manual
with your mobile phone
26
27
Instructions for Use
Operational Guidance
