TX3706-UM-EN-02 23
TX3706 • User Manual
6 Maintenance
No regular maintenance is required
Flame paths and ingress protection seals should be inspected at periodic intervals, in accordance
with local statutory regulations and light protective grease applied when necessary.
Disclaimers
The information provided in this document contains general descriptions and technical
characteristics of the performance of the product. It is not intended as a substitute for and is not
to be used for determining suitability or reliability of this product for specific user applications.
It is the duty of any user or installer to perform the appropriate and complete risk analysis,
evaluation and testing of the products with respect to the relevant specific application or use.
Trolex shall not be responsible or liable for misuse of the information contained herein. If you
have any suggestions for improvements or amendments, or find errors in this publication,
please notify us at [email protected].
No part of this document may be reproduced in any form or by any means, electronic or
mechanical, including photocopying, without express written permission of Trolex.
All pertinent state, regional, and local safety regulations must be observed when installing
and using this product. For reasons of safety and to help ensure compliance with documented
system data, only Trolex or its affiliates should perform repairs to components.
When devices are used for applications with technical safety requirements, the relevant
instructions must be followed.
Trademarks
© 2018 Trolex® Limited.
Trolex is a registered trademark of Trolex Limited. The use of all trademarks in this document
is acknowledged.
Patent pending.
Document history: Issue 01 -May 2016
Issue 02 -February 2018
Trolex Ltd
, Newby Road, Hazel Grove, Stockport, Cheshire, SK7 5DY, UK
+44 (0) 161 483 1435 [email protected]
www.trolex.com
