Trolex Sentro Wireless TX6355, User Manual, Page: 42 / 57

42 P5596.1600 rev B
www.trolex.com
This is a user configurable parameter. This
is how often (in minutes) the I/O board
will queue a CommTrac location message.
The default value for this parameter is
1440 minutes. The range is 1 to 32767. This
parameter can also be set via a CommTrac
over-the-air message.
Press
R to increment the digits as required.
Press L to move to the next digit. Repeat for
all digits, press L and select Save or Cancel
as required. Press R to confirm the selection
and return to the CommTrac Setup Menu .
4.5.5.8 Sensor Msg Interval
From the CommTrac Setup Menu press L ,
navigate to Sensor Msg Interval and press R
to enter the Sensor Msg Interval Menu .
This is a user configurable parameter to define
how often (in seconds) the I/O board will
queue a CommTrac sensor message when
there are no alarms. If there are alarms a
sensor message is generated as soon as the
I/O board sees them via polling of the Sentro
Wireless. The default value for this parameter
is 90 seconds. The range is
10 to 32767. This parameter can also be set
via a CommTrac over-the-air message.
Press
R to increment the digits as required.
Press L to move to the next digit. Repeat for
all digits, press L and select Save or Cancel
as required. Press R to confirm the selection
and return to the CommTrac Setup Menu .