Trolex Sentro Wireless TX6355, User Manual, Page: 12 / 57

12 P5596.1600 rev B
www.trolex.com
2. Certification
2.1 United States of America
2.1.1 MSHA Approval
Meets the applicable requirements of Title 30 Code of Federal
Regulations, Part 18 (30 CFR Part 18). Approval No. 18-A150002-0.
For conditions of use refer to the MSHA controlled drawing no.
P5596. 1800.
2.1.2 Pennsylvania Approval
Pennsylvania Approval no. BFE 43-15 has been assigned to the
equipment. Pennsylvania State has determined that the minimum
safe blasting distance is 16.7 feet.
2.1.3 Gas Performance Approval
QPS certification covers the following:
• Sentro Wireless fixed point CO gas detector, model no.
TX6355.04.02, when fitted with a CO sensing eModule with part
no. TX6350.04.250.50 (0 to 50 ppm range) or eModule part no.
TX6350.04.250.500 (0 to 500 ppm range).
• Powered by 4 Energizer E95 D-cell type batteries.
• Indoor use and CO gas only.
• Ambient temperature range of -20°C to +40°C
Note: Only the display and local alarm indications were assessed
during the performance verification. The wireless output function was
not assessed during the performance verification but may be used
for data collection and record keeping functions or other non-safety
related functions.
Applicable Standards
• ANSI/ISA-92.00.01- 2010 “Performance Requirements for Toxic
Gas Det ectors, Approved 13 January 2011”
• UL 61010- 1 “UL Standards for Safety Electrical Equipment for
Measurement, Control, and Laboratory Use; Part 1: General
Requirements
– Third Edition; Reprint with revisions through and
including July 15, 2015”.