Trolex Sentro Vortex Wireless TX5952, User Manual

Page: 44 / 60

44 TX5952-UM-EN-01a
Press L to start a Test to verify if the Sentro
Wireless is communicating with the wireless
network. A Test result of Busy , Passed ,
Failed or Timed Out will display once the
Test is completed.
4.5.4.7 Location Msg Interval
From the CommTrac Setup Menu press L ,
navigate to Location Msg Interval and press
R to enter the Location Msg Interval Menu .
This is a user configurable parameter. This
is how often (in minutes) the I/O board
will queue a CommTrac location message.
The default value for this parameter is
1440 minutes. The range is 1 to 32767. This
parameter can also be set via a CommTrac
over-the-air message.
Press R to increment the digits as required.
Press L to move to the next digit. Repeat for
all digits, press L and select Save or Cancel
as required. Press R to confirm the selection
and return to the CommTrac Setup Menu .
4.5.4.8 Sensor Msg Interval
From the CommTrac Setup Menu press L ,
navigate to Sensor Msg Interval and press
R to enter the Sensor Msg Interval Menu .
This is a user configurable parameter to
define how often (in seconds) the I/O board
will queue a CommTrac sensor message
when there are no alarms. If there are alarms
a sensor message is generated as soon as
the I/O board sees them via polling of the
Sentro Wireless. The default value for this
www.trolex.com