Trojan STAMINA 300, Care Instructions And Assembly Manual

Page: 11 / 24

xxxx-11
COMPUTER FUNCTION
OPERATION
STEP 1 (MANUAL OPERATION)
Attach the Safety key to wake display up (if not already on), the upper big window will display P0 (Manual). You can
press the ST/SP button to begin belt movement, at 1.0 km(lMph), The console will start a 3 seconds final count
down. During training, all parameters will be accumulating.
OR
STEP 1 (PRESET PROGRAMMES)
Attach the Safety key to wake display up (if not already on). Press and hold Fast/Slow buttons to adjust desired
preset program from P1 to P5. You can press the ST/SP button to start training, the preset count down time is 20
minutes in no adjusted condition. Or press MODE button to set the count down time which will flash, adjust the
value by using Fast/Slow buttons from 00:00 to 99:00. You can press MODE button to go back to idle mode, or press
ST/SP to start. If time set to 00:00, time will execute by accumulating, otherwise it will execute by count down.
STEP 2
After training, press MODE button to display single parameters which includes speed, time, distance, calories, pulse/
incline or choose SCAN mode at the left top area which will display SCAN character and all parameters will take
turns to display the data every 5 seconds.
STEP 3
To slow tread-belt press and hold the Slow key (console) to the desired speed.
STEP 4
To stop the tread-belt press ST/SP button.
PULSE GRIP FEATURE
The Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout. You
must use both stainless steel sensors on the front cross bar to display your pulse on the PULSE/INCLINE window. Pulse
value displays anytime the upper display is receiving a Grip Pulse signal. Note: Pulse and incline use a common window.
When upper display is receiving a Grip Pulse signal, pulse has a preferential right to display the value. But while the incline
has variation, the console will display the incline position for a short time, then go back to display the Pulse value.
INCLINE FEATURE
Incline may be adjusted anytime after belt movement. Press and hold the UP/DOWN buttons (console) to achieve
desired level of effort from 0 to 10 or from 10 to 0. Make sure the value of incline has changed to the desired level, then
stop pressing, console will execute it at that time or else console will not execute the adjustment. The display will indicate
incline percent as adjustments are made. Incline will remain in it’s position when display is turned off.