Trojan PACE 380, User Manual

Page: 12 / 23

12
ASSEMBLY STEPS
STEP 3: CONSOLE POST AND TENSION CONTROL KNOB ASSEMBLY
Remove 4 Bolts (M8 x 15 mm) (19) and Big Curved Washers (Ø20 mm x Ø8 mm) (14) from the tube of the Main Frame (1).
Insert the Tension Cable (L = 1150 mm) (55) through the bottom hole of the Console Post (7) and pull it out from the
square hole of the Console Post (7). Connect the Sensor Wire (L = 750 mm) (50) from the Main Frame (1) to the Middle
Wire (L = 1000 mm) (67) from the Console Post (7).
Pull the Console Post Cover (58) up to the Console Post (7), and insert the Console Post (7) into the tube of the Main
Frame (1) and secure with 4 Bolts (M8 x 15 mm) (19) and 4 Big Curved Washers (Ø20 mm x Ø8 mm) (14) that were
removed. Pull down the Console Post Cover (58) to the bottom of the post.
Remove the Screw (M5 x 55 mm) (68) and the Big Curved Washers (Ø5 mm) (69) of the Tension Control Knob (54).
Put the cable end of cable of Tension Control Knob (54) into the spring hook of the Tension Cable (L = 1150 mm) (55)
as shown in drawing A. Pull the resistance cable of Tension Control Knob (54) up and click it into the gap of the metal
bracket of Tension Cable (L = 1150 mm) (55) as shown in drawing B. Attach the Tension Control Knob (54) onto the
Console Post (7) with the Screw (M5 x 55 mm) (68) and Big Curved Washer (Ø5 mm) (69) that were removed.
STEP 3