Trojan Marathon 320, User Manual, Page: 15 / 32

15 10375
2
45
54
53
STEP 6
• Tighten the two 5/16” × 1-3/4” Hex Head Bolts (86) and two 5/16” × 7T Nyloc Nuts (68), using the
two13/15 mm Wrench (44).
STEP 7
• Expand the deck until it clicks into place. Use the Combination M5 Allen Wrench and Phillips Head
Screw Driver (45) to tighten the M5 × 20 mm Phillips Head Screw (54) and the Ø5 × Ø30 × 40T
Rubber Foot Pad (53) on the mainframe.
ASSEMBLY STEPS
CAUTION:
Ensure that cables are not damaged
during assembly or when
tightening screws.
Re-check
All bolts and nuts are
tightened securely
before using the machine
STEP 6
STEP 7
86 68
86
68
44
44