Trojan INFERNO 300, Care Instructions And Assembly Manual

Page: 7 / 20

1377-7
4. ASSEMBLY STEP
STEP 01
• Prior to assembly of this product, remove all components
from the package and verify all the listed parts are supplied.
Once certain, begin with the first assembly step.
1-1 Pull the pop pin and insert the handlebar (1) into the
handlebar receptor and secure with the pop pin.
1-2 Pull the pop pin and insert the seat post (2) into the
receptor and secure with the pop pin.
STEP 02
2-1 Attach the left pedal (3) and the right pedal (4) to
the bike with adjustable wrench(5).
2-2 Tighten the pedals with the adjustable wrench sup-
plied in your package.
Note : The pedals are marked L and R on the flat face
of the threaded area and are referenced from a
seated position on the bike. The left pedal must
be tightened counterclockwise, and the right pedal
must be tightened clockwise.
STEP 03
3-1 Mount the front stabilizer (6) using two allen bolts(8)
and two washers (9) . Then tighten clockwise using
the allen wrench included in your package.
3-2 Mount the rear stabilizer (7) using two allen bolts(8)
and two washers (9) .Then tighten clockwise using
the allen wrench included in your package.
3-3 Attach the console to the handlebar as described in
console packaging