Trojan ELITE 1000, User Manual

Page: 11 / 24

11
ELITE-SB
ASSEMBLY STEPS
STEP 3: HANDLEBAR AND
HANDLEBAR POST
Insert the Handlebar Post (19) into the handlebar post
tube on the main frame. You will have to slacken the
Knob (11) and pull the Knob back. Then select the
desired height. Release the Knob and retighten the
Knob.
Attach the Handlebar (25) onto the Handlebar Post (9)
with the Knob (12) and the Flat Washer (13).
The Computer (81) is fixed on the handlebar (25).
The Plug (A1) of the Sensing Line plug into the sensor
signal input hole of the computer.
The Mobile Phone Bracket (pt.83) and the Kettle Holder
(pt.84) are fixed on the Handlebar (pt.25)
ATTENTION: YOU SHOULD FIX THE
HANDLEBAR TIGHTLY
STEP 4: PEDAL ASSEMBLY
The Pedals (8L & 8R) are marked “L” and “R” - Left
and Right. Connect them to their appropriate crank
arms. The right crank arm is on the right- hand side
of the cycle as you sit on it.
Note: The Right pedal should be threaded on
clockwise and the Left pedal anticlockwise.
STEP 3
STEP 4