Trojan Cadmaster CBM 128 User Instructions Download Page 7

starting point. 

4.  Type  required  TEXT  on  keyboard.  Use  SPACE  bar  to 

move cursor onto next line. 

Press  RETURN  key  to  leave  this  option  and  to  return  to  the 

MAIN MENU

FREEHAND DRAW 

1.  Select DRAW option. 
2.  Use  pen  to  move  cursor  to  starting  point  required  for 

drawing. 

3.  Press  and  hold  CTRL  down  when  drawing  and  move  pen 

smoothly  over  the  screen  at  a  reasonable  speed.  Use  the 
CTRL key as you would lift pen or pencil from paper when 
drawing normally. 

Press  Q  key  to  leave  this  option  and  to  return  to  the 

MAIN 

MENU

BRUSH 

1.  Select BRUSH option. 
2.  Use  pen  to  move  cursor  to  starting  point  required  for 

brushing. 

3.  Press and hold CTRL key  down when brushing and move 

pen smoothly over screen at a reasonable speed. Use the 
CTRL  key  as  you  would  lift  a  brush  from  paper  when 
painting normally. 

Press  Q  key  to  leave  this  option  and  to  return  to  the 

MAIN 

MENU

COPY 

1.  Select COPY option. 
2.  Place  1st.cursor  at  bottom  left  hand  corner  of  area  to  be 

copied. 

3.  Press CTRL key to set cursor. 
4.  You  may  now  PIN  POINT  cursor  by  using  the  CRSR  keys. 

When  cursor  is  PIN  POINTED  press  CTRL  key  to  lock 
1st.cursor in position. 

5.  Move  2nd.cursor  to  top  right  hand  corner  of  area  to  be 

copied. 

6.  Press  CTRL  key  to  set  2nd.cursor.  Dynamic  banding  box 

of area to be copied will now appear on screen. 

7.  You  may  now  PIN  POINT  2nd.cursor  by  using  the  CRSR 

keys.  When  cursor  is  PIN  POINTED  press  CTRL  key  to 
lock 2nd.cursor. 

8.  Select size of COPY required from the COPY menu which 

will now appear on screen. 

Summary of Contents for Cadmaster CBM 128













Reviews: