change to reverse print and remain that way until you choose
any other LINE TYPE option. The LINE TYPE which you select
will be used with any of the following options that you may
select—BOX,CIRCLE,LINE,BANDING,RAYS and DRAW.
1. THIN. This option will produce a uniformly thin line.
2. QUIL 1,2&3. These options produce a thicker line in the
“X” direction than in the “Y” direction thus giving a
“Copperplate” effect. Quil 1,2&3 are graded to give a
progressively thicker line.
3. THICK. This option will draw a uniformly thick line.
4. XDOT. This option produces a dotted line in the “X”
direction and can be used to produce vertical lines in the
DRAW option.
5. YDOT. This option produces a dotted line in the “Y”
direction and can be used to produce horizontal lines in
the DRAW option.
6. DOTLI. This option produces a dotted line in the DRAW
option or in any of the GEOMETRIC options.
GEOMETRIC OPTIONS
The GEOMETRIC options can all be drawn in any of the LINE
TYPES so be sure to select the type which you require before
choosing a GEOMETRIC option.
BOX
1. Select BOX option.
2. Use the pen to move the 1st.cursor to the point on the
screen where you require one corner of the box to be
positioned.
3. Press the CTRL key to set the 1st.cursor.
4. You may now “Pin Point” the 1st.cursor by using the CRSR
keys. When cursor has been “Pin Pointed” press CTRL to
lock 1st.cursor in position.
5. Now position 2nd. cursor where you require the opposing
corner of the BOX to be positioned.
6. Press the CTRL key to set the 2nd.cursor.
7. You may now “Pin Point” the 2nd.cursor by using the
CRSR keys. The BOX will appear on screen in Dynamic
banding and will be repositioned by moving the
2nd.cursor.
8. When correct position is acquired press CTRL to lock
2nd.cursor and BOX in position.
You may now repeat this option as required.
Press Q key to leave this option and to return to the
MAIN
MENU
.
