manualshive.com logo in svg

Troglotech T804 WiFi System, Operating Instructions Manual, Page: 23 / 24

Share
Download
Troglotech T804 WiFi System Operating Instructions Manual Download Page 23

Troglotech T804 User Manual SD VERSION              Page 23 

ACCESSORIES 

DC Lead

: 

To extend the operation time of the T804 
system, the DC Lead can be used to both 
charge the power cell and operate the 
Trogloprobe system at the same time. The DC 
Lead is 3 metres in length and has a cigar-
lighter plug to connect to a vehicle with a 12V 
battery system. 
The DC lead is especially useful for recharging 
the Power Cell while travelling between inspections. Each hours charge while 
travelling can provide up to three hours operation time without the need for any 
generator or external power supply. 
 

Extra Power Cell

: 

If up to eight-hours operation duration is insufficient and 
a 12V supply is not available, an additional power cell 
can be supplied. The Trogloprobe power cell uses 
advanced lithium ion cells to provide dependable energy 
and the machined-from-solid enclosure provides IP67 
full waterproofing. 
The T804 power cell is clipped to the system frame and 
can be released and replaced in seconds. There are no 
leads to connect, the power cell has a captive 
waterproof connector that automatically mates with the hub. 
The power cell also contains battery-manager electronics to enable charging from 
a 12V DC source via the DC lead if mains electricity is not available. The Power 
Cell is exceptionally robust with an anodised finish. 
 

Flexitail for awkward traps 

 
Having problems getting through some of the 
new traps? We offer the Flexitail - which 
allows the camera to negotiate multiple tight 
bends with ease. The Flexitail can be used 
with the T800 Forward-View camera or the 
T812 Pan & Tilt camera.  
 
The Flexitail is simply fitted to the T804 
Trogloprobe termination and the camera 
fitted to the other end..

 

Summary of Contents for T804 WiFi System

























Reviews:

No comments