14
Flash Stamp Machine T1511M
Place transparency film
Place one sheet of transparency film on top of the
printed vellum. Ensure that the transparency sheet
fully covers the vellum paper. The clear transparency
film can be used from both sides. It is necessary to
prevent the toner (from the printed vellum) from being
deposited on the die box or foam due to the pressure
and heat generated during the exposure process.
Tip: For easier handling you can staple the vellum
and transparency together and then place it on the
glass. This will prevent the vellum and transparency
from sliding when you proceed to the next step.
Place die box or foam
Take the appropriately sized die box or foam for your printed artwork. Make sure that the
transparency film as well as the die box or foam is clean and dust free. If necessary you can
clean it with a dry cloth. Place the (a) die box or (b) foam (grey foam side facing down) on top
of the transparency using the positing frame of the artwork. Make sure that the (a) die box or
(b) foam is positioned exactly within the positing frame. You can also expose multiple die boxes
or foams during one exposure process.
(a) Place die box
(b) Place foam
Place transparency
(a)
Die box within positioning frame
(b) Foam within positioning frame
