TRNDlabs SKEYE, User Manual, Page: 13 / 16

13
Replacing Rotor Blades
Problem: Controller does
not work.
Cause: The power switch is
turned “OFF”.
Solution: Turn the power
switch “ON”.
Cause: The batteries have
been wrongly inserted.
Solution: Check if the
batteries have been
correctly inserted.
Cause: The batteries do not
have enough power.
Solution: Insert new
batteries.
Problem: The drone cannot
be controlled with the
controller
Cause: The power switch
on the controller is turned
“OFF”.
Solution: First turn the
power switch on the
controller “ON”.
Cause: The controller
is possibly not correctly
frequency bound with the
receiver on the drone.
Solution: Please carry out
the binding procedure as
described in “Flying Your
Drone”.
Problem: The drone does
not lift.
Cause: The rotor blades
rotate too slowly.
Solution: Push the
throttle up.
Cause: The battery’s
power is not sufficient.
Solution: Charge the
battery (see chapter
“Getting Started /
Charging”).
Problem: During flight,
the drone loses speed
and height without any
obvious reason.
Cause: The battery is too
weak.
Solution: Charge the
battery (see chapter
“Getting Started /
Charging”).
Problem: The drone only
flies in a circle or turns
over on starting.
Cause: Rotor blades
incorrectly fitted or
damaged.
Solution: Fit rotor
blades/replace rotor
blades (see chapter
“Replacing Rotor
Blades”).