Trixy Aviation G 4-2, Maintenance Manual

Page: 62 / 128

Maintenance manual G 4-2 Revision 05A – 03.05.2017 Doc. No.: TA-M-D-002-EN
62
Warning : This manual does not substitute the education of an
aviation technician or the authorization of an aviation maintenance
workshop. IT is to be used in addition to the maintenance manuals of
engine and propeller.
Attention: Only persons authorized by the gyrocopter manufacturer
are allowed to perform maintenance and repair works on the
gyrocopter. Persons to perform maintenance and repair works on
either engine or propeller must be authorized by the respective
manufacturer.
Note : All warranties are void in case that the instructions in this
manual are not carefully followed.
3 SYSTEMS
3.1 Introduction
The systems of the gyrocopters G 4-2 are described and illustrated in
this chapter of the maintenance manual. Construction drawings and
material lists are not included in this manual. It is considered that
authorized persons and/or authorized aircraft repair and maintenance
workshops are to perform maintenance on the gyrocopter. Such
authorized persons and workshops must be trained by the
manufacturers of the gyrocopter, the engine and the propeller. They
may contact the manufacturer whenever more information is required.
All maintenance works and small repairs on both engine and propeller
must be performed according to the instruction of the manufacturer.
Only original parts from the manufacturer are to be used, whenever
replacing any part of the gyrocopter.