Trix 21520, Manual

Page: 7 / 20

7
Functions
• This model is designed for operation with H0 2-rail
DC systems (track according to NEM standards) with conven-
tional DC power packs.
• This locomotive comes equipped with a Trix connector for
digital operation and can have the Märklin locomotive decoder
60942 installed in it.
• Trix motor vehicles must not be operated on digital systems
without an built-in engine decoder (Motor can be damaged!).
• Minimum radius for operation is 360 mm / 14-3/16“.
Safety Notes
• This locomotive is only to be used with the operating system it
is designed for.
• Analog max. 15 Volts DC, digital max. 22 volts AC.
• This locomotive must not be supplied with power from more
than one power pack.
• Please make note of the safety notes in the instructions for
your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 611 655 interference
suppression set is to be used for this purpose. The interfe-
rence suppression set is not suitable for digital operation.
• WARNING! Sharp edges and points required for operation.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
Important Notes
• The operating instructions and the packaging are a compo -
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or spare
parts.
• http://www.maerklin.com/en/imprint.html
• The warranty card included with this product specifies the
warranty conditions.