Quick Installation Guide for RP010
Required components for installation:
– 24 V DC power supply with at least 2.5 A
– ethernet cable
– network with DHCP capable router
– music amplifier with analog input
– music archive (network share, NAS)
Optional components:
– trivum TouchPad for high comfort music selection
– wireless access point (if a mobile device is to be used)
– internet connection (required for software updates and
remote support)
1. Mounting and connection
1.1
Mount the RP010 on a 35 mm DIN-rail.
1.2
Connect the Line Out to the input of your amplifier.
1.3
Connect the power supply.
!
Warning: Wrong polarity may damage the device!
Double check power cable polarity before connecting!
2. Configuration
The trivum RP010 has to be configured via web browser.
We recommend you to use the trivum ServerAdmin Tool.
The ServerAdmin Tool lists all trivum devices and their
IP addresses in your network.
2.1
Please download and install the ServerAdmin Tool:
http://service.trivum.com/win-admintool
i
Note:
If you don‘t want to use the ServerAdmin Tool,
you have to identify the IP address of the RP010, open your
browser and enter: IP address/setup
2.2
Start the ServerAdmin Tool.
2.3
Double-click on the device (RP010) to open the
MusicCenter WebConfig (main config site).
i
Note:
If you are not sure about the assignment of the
listed devices, you can compare the serial number in the list
with the serial number on your device.
2.4
Static IP instead of DHCP? click
Network
.
2.5
Select
Use static IP address
.
2.6
Enter your IP settings and
Restart to apply changes
.
3. Adding a network share
The trivum RP010 can play sound files which are stored on
network shares. If you want to use a shared directory, make
sure that it supports the media sharing service Samba
service (smb). To add a network share (e.g. NAS):
3.1
Open the MusicCenter WebConfig.
3.2
Click:
Music Library
->
Setup music library
->
Add network share.
3.3
Set the network path and user/password if required.
3.4
Click
Save as new share
.
3.5
Click
Refresh your music index now
.
4. Adding your online streaming service
account
4.1
Open the MusicCenter WebConfig.
4.2
Click
Add service.
4.3
Select your favorite service and enter your
user account.
4.4
Click
Create the streaming service given account
.
i
Note:
trivum supports only paid accounts.
l
Tip:
The RP010 is AirPlay ready, so it’s easy to stream
every kind of music to the specific zone (with Apple
devices).
Backup your configuration
Once you have completed the setup, we recommend you
to make a backup of your configuration:
– Open the MusicCenter WebConfig.
– Click
Backup/Restore
->
Export/import configuration.
– Follow the instructions.
For easy operation of your RP010, we recommend our
trivum TouchPad.
How to use a trivum TouchPad?
– Make sure your TouchPad is running software v2.35 or
above.
– Wait a few seconds until the TouchPad has booted.
– On the starting screen press
Pair TouchPad with Audio System.
– Press
Select...
and select your preferred trivum
MusicCenter from the pop-up menu.
How to use KNX?
The KNX programming of RP010 is done via web browser.
No need for extra KNX software.
– Open the MusicCenter WebConfig.
– Click
KNX
and enable
use KNX
.
– Follow the instructions.
You find further informations for KNX on:
http://service.trivum.com/knx
